600气体割圆机等离子钢板切圆机火焰切圆机

一、DC2-600/DC2-1000切圆机概述：半自动割圆机的电机通过变速箱带动可调节长度的半径杆,再带动割炬作旋转运动进行切割，也可在钢板竖直(90度)和角度（45度）摆放情况下进行切割，并可进行气割同心圆切割。使用该割圆机可提高工效、质量，减轻工人的劳动强度。1.采用旋转气体分配器，工作时胶管不缠绕；2.本割圆机采用高强度铝合金压铸制成，轻巧便携。广泛应用于石油，化工，造船，机械制造等领域切割管材

二、半自动割圆机的详细参数

型号:CG2-600火焰割圆机（可配双头）                                                             

1.切割圆直径:30-600mm                                                                                              

3.切割钢板厚度5-100mm                                                                                           

4.表面粗糙度达:12.5 - 6.3                                                                                            

5.切割精度:1 mm/转                                                                                                     

6.切割速度:0.2-6.0r.p.m (每分钟转速)                                                                       

7.电源电压：AC220V/50Hz                                                                                         

8.圆度偏差小于1mm                                                                                                    

9.尺寸:750×300×700mm                                                                                           

10.重量:30kg                                                                                                                   

-----------------------------------

‚型号:CG2-1000火焰割圆机（可配双头）

1.切割圆直径:30-1000mm

3.切割钢板厚度5-100mm

4.表面粗糙度达:12.5 - 6.3

5.切割精度:1 mm/转

6.切割速度:0.2-6.0r.p.m (每分钟转速)

7.电源电压：AC220V/50Hz

8.圆度偏差小于1mm

9. 重量:53kg

订购热线：13355477682